Jaeco Hi-Flo™ Metering Pumps - Jaeco Fluid Systems, Inc.

(20 to 682 GPH; up to 7200 PSI)

Heavy duty positive displacement for continuous, accurate metering at higher flow rates and/or pressures.
Positive displacement supplies a simple and virtually maintenance-free approach to accurate chemical feed.
Available in both simplex and duplex models.
Capacity is manually adjustable, but only while pump is idle, as a safety precaution and for tamper resistance.
Capacity is easily automated using variable-speed drive.
Stroke length is adjustable for a turn-down ratio of 10:1.
Accuracy of ± .5% at steady state.
Single ball check valve, standard on both suction and discharge side of the pump, provides accurate metering and fast response. Valve ball turns with fluid flow, constantly presenting a new face to the seat, and is therefore self-cleaning.
Because it is a true positive displacement pump, a safety relief valve on all closed loop systems is required to prevent possible over pressuring the discharge line.
Integral lantern ring for packing lubricant may be used for internal purging when handling crystallized, corrosive or other hazardous liquids.
Packing adjustment screwed gland nut ensures even take-up and fewer packing problems.
Models 324, 332 and 340 have a clamped column, suction and discharge check valve assembly that can be easily cleaned, inspected or replaced without breaking pipe connections.
Available with motor or as bare pump.
All units come epoxy painted, completely assembled on a base plate and have been fully tested.

Liquid End: 316 Stainless Steel
Alloy 20
Seals: Neoprene
PTFE
Viton®

Spring-loaded single ball check valves on models 312 & 316.
Double ball check valves with or without spring-loaded balls on models 312 & 316.
Purge-port plugs, available in cylinder end, can be used to bleed air during and after start-up and to solvent-purge the liquid end. They also provide easy access to the cylinder without breaking pipe connections.